To top

SLC OneSoft Ø68-83 mm White 627lm 3000K Ra>90 Trailing edge IP44 36°

SLC OneSoft is a low downlight that can be recessed into holes from 68 to 83mm, which is ideal for replacing halogen downlights. It can be mounted directly into the insulation. SLC OneSoft features a recessed light source, resulting in reduced glare. LED light source with a 36° reflector.

incl. VAT

Back to product variants

See document archive
SKU: SLC1125
Stock:
Light technic
Beam angle 36 °, Medium beam 21-40° °
Expected lifetime 50 000
Light reduction L80B10
Efficacy 72 lm/W
Luminous flux (lm) 627
MacAdam (SDCM) 3
Glare (UGR) UGR<26
Reflector High-gloss
Colour rendering index CRI 90-100
Lamp type LED not exchangeable
Light outlet Direct
Light sharing Symmetric
With light source Yes
Colour temperature 3000.0 - 3000.0 K
Rated luminous flux according to IEC 62722-2-1 627 lm
Colour of light White
Colour consistency (McAdam ellipse) SDCM3
Light distributor Reflector
Technical data
CE Yes
Exterior color White
Dimmable Yes
IP class IP44
Operating temperature -10°C ~ +45°C °C
Protection class II
Colour housing White
Surface protection Powder coating
Suitable for lamp power 8.0 - 8.0
Type of control gear LED operating device current-controlled
Material housing Aluminium
Material cover Plastic, transparent
Degree of protection (IP) IP44
Control gear included Yes
Max. system power 8 W
Adjustability Not adjustable
Rated ambient temperature according to IEC62722-2-1 -10.0 - 40.0 °C
Dimming phase cut-off Yes
Power factor 0.9
Dimming interface Trailing edge
Input
Electrical connection (Input) L`L`N`N quick connection
Voltage type AC
Nominal voltage 220.0 - 240.0 V
Power factor 0.9
Installation
Height/depth 46 mm
Built-in width 67 mm
Height 49 mm
Built-in height/depth 46 mm
Length 90 mm, 90 mm
Width 90 mm, 90 mm
Can be installed directly into the insulation Yes
Outer diameter 90 mm
Conductor cross section 0.35 mm2
Connection type Push-in clamp
Suitable for suspended mounting No
Number of poles 3
Suitable for built-in mounting Yes
Connectable conductor cross section 0.75 - 2.5 mm²
Type of wiring Suitable for through wiring
Suitable for ceiling mounting Yes
logistics data
Imported by The Light Group
Brand SLC
F-Pak
F-pack width 112 mm
F-pack height 50 mm
F-pack weight 254 g
F-pack length 100 mm
D-Pak
D-pack quantity 50 pcs
D-pack width 290 mm
D-pack length 590 mm
D-pack weight 16200 g
D-pack height/diameter 370 mm
General data
Pallet length 1200 mm
Rated power 8 W
M-Pak
M-pack length 138 mm
Number 1
M-pack weight 302 g
M-pack height 63.5 mm
M-pack width 112.5 mm
If you're looking for a high-quality lighting solution with low glare and easy installation, look no further than SLC OneSoft Downlight. This innovative and flexible downlight fits cut-out holes with a 68-83mm diameter and can be directly mounted into the insulation, eliminating the need for a separate ceiling box.

To make the installation process even easier, SLC OneSoft comes fully assembled and packaged in environmentally friendly, plastic-free packaging. Unpack and install – no mess, no fuss.

Not only is SLC OneSoft Downlight practical and easy to install, but it's also perfect for lighting rooms with screens and TVs. Its recessed light source ensures even lighting without glare and comes complete with a dimmable driver for adjusting the light intensity as needed.

With a built-in low height of just 46mm, SLC OneSoft Downlight is ideal for installation in low-height ceilings. And, as it's CE and ROHS certified, you can be confident that it meets high environmental and safety standards. Plus, it's flicker-free, making it an excellent choice for illuminating work areas where eyes are taxed for longer periods.

In short, SLC OneSoft Downlight is the perfect solution for all your lighting needs.

• Dimmable (TED) driver included
• Recommended dimmer: SLC SmartOne (S24019)
• *No installation box required (for Trailing Egde version)
• Suitable for outdoor installation*
• Sea air resistant*
• Quick connection box with Loop-in / Loop-Out
• 16 mm Cable/Tube connection

SLC One360 / OneSoft Extension Bezel White

• Extension ring that fits cut-out holes Ø: 83-110 mm• Inner diameter Ø: 70 mm• Outer diameter Ø: 134 mm• Produced in the same finish as the white OneSoft & One360
SLC1150
 

SLC ONE SOFT DECO BOX BLACK

Deco Box for SLC One Soft downlights. Decorative cover that is easy to install with the One Soft downlights. Also reduced glare. Height: 60 mm. Width: 93,5 mm. Cut out-hole: 70 mm
SLC1131
 

SLC One360 / OneSoft Rehab Ring BL Ø83-110 Ø134

Extension ring that fits cut-out holes Ø: 83-110 mm• Inner diameter Ø: 70 mm• Outer diameter Ø: 134 mm• Produced in the same finish as the white OneSoft & One360
SLC1151
 

SLC OneSoft Deco Box White

Deco Box for SLC One Soft downlights. Decorative cover that is easy to install with the One Soft downlights. Also reduced glare. Height: 60 mm. Width: 93,5 mm. Cut out-hole: 70 mm
SLC1130
 

SLC OneSoft White Deco Tube

Deco Tube for SLC One Soft downlights. Decorative cover that is easy to install with the One Soft downlights. Also reduced glare. Height: 60 mm. Outer diameter: 93,5 mm. Cut out-hole: 70 mm
SLC1128
 

SLC OneSoft White Deco Tube

Deco Tube for SLC One Soft downlights. Decorative cover that is easy to install with the One Soft downlights. Also reduced glare. Height: 60 mm. Outer diameter: 93,5 mm. Cut out-hole: 70 mm
SLC1129
 

SLC SmartOne Zigbee Mini Trailing edge IP20

Mini phase section dimmer based on the latest Zigbee 3.0 protocol. Dimmer from 1-100%. Push input. Compatible with most smart home systems. Supports TouchLink communication with Zigbee remote controls and switches. Small size, fits in standard wall box. Adjustable minimum dimming level.
S24013
 

SLC SmartOne Zigbee Relay On/Off Not dimmable IP20

On/off switch based on the latest Zigbee 3.0 protocol. 100-240V AC input and output voltage. Push input. Compatible with most smart home systems. Supports TouchLink communication with Zigbee remote controls and switches. Small size, fits in standard wall box. ATTENTION! Not potential-free output.
S24015