SLC Driver 24V 100W DALI DT6 IP20
Power Supply CV 24V 100W DALI DT6 1-4CH is a UL, ENEC, and TUV approved DALI 100w dimmable LEO driver with 4 channels 24VDC constant voltage output and 100-277VAC universal input.
incl. VAT
See document archive
SKU: S32015
Stock:
| Light technic | |
|---|---|
| Expected lifetime | 50 000 |
| Technical data | |
|---|---|
| Number of DALI-address | 4 |
| CE | Yes |
| IP class | IP20 |
| Operating temperature | -20°C ~ +45°C °C |
| Protection class | II |
| Housing | Plastic housing |
| Degree of protection (IP) | IP20 |
| Suitable for constant current | No |
| Suitable for constant voltage | Yes |
| Dimming 0-10 V | No |
| Dimming 1-10 V | No |
| Dimming DALI | Yes |
| Dimming DMX | No |
| Dimming potentiometer (integrated) | No |
| Dimming LineSwitch | No |
| Dimming manufacturer's proprietary system | No |
| Dimming mains voltage modulation | No |
| Dimming phase cut-off | No |
| Dimming phase cut-on | No |
| Dimming programmable | No |
| Dimming RF | No |
| Dimming Sine Wave Reduction | No |
| Dimming Touch and Dim | No |
| Dimming Zigbee | No |
| Dimming with push-button | No |
| No dim function | No |
| Dimming DSI | No |
| Technology | Constant voltage (CV) |
| Dimming interface | DALI DT6 |
| Input | |
|---|---|
| Electrical connection (Input) | L`N screw connection |
| Power factor | 0.9 |
| Suitable for DC-voltage (primary side) | No |
| Output | |
|---|---|
| Output power | 10.0 - 100.0 W |
| Output voltage | 24.0 - 24.0 V |
| Output current | 420.0 - 4200.0 mA |
| Installation | |
|---|---|
| Height | 32 mm, 32 mm |
| Length | 244 mm, 244 mm |
| Width | 64 mm, 64 mm |
| Model | Static |
| Suitable for outdoor use | No |
| logistics data | |
|---|---|
| Imported by | The Light Group |
| Brand | SLC |
| F-Pak | |
|---|---|
| F-pack width | 64 mm |
| F-pack height | 32 mm |
| F-pack weight | 540 g |
| F-pack length | 244 mm |
| D-Pak | |
|---|---|
| D-pack quantity | 30 pcs |
| D-pack width | 270 mm |
| D-pack length | 380 mm |
| D-pack weight | 17500 g |
| D-pack height/diameter | 280 mm |
| M-Pak | |
|---|---|
| M-pack length | 256 mm |
| Number | 1 |
| M-pack weight | 550 g |
| M-pack height | 70 mm |
| M-pack width | 40 mm |
| General data | |
|---|---|
| Rated power | 100 W |
Power Supply CV 24V 100W DALI DT6 1-4CH is a UL, ENEC, and TUV approved DALI 100w dimmable LEO driver with 4 channels 24VDC constant voltage output and 100-277VAC universal input. The power factor of the driver can be over 0.9 and efficiency is higher than 90%. lt enables smooth and deep dimming to 0.1% without flickering and buzzing noise. DALI address quantity can be set as 1/2/3/4 which enables the driver to control single colour, tunable white, RGB/RGBW LED lighting. DALI addresses can be manually assigned via buttons and showed on the digital display or automatically assigned by DALI masters. Complying with IEC62386·101, 102, 207, this DALI driver is compatible with universal DALI masters. UL, ENEC and TUV certification ensures high safety performance of the driver to be used worldwide.
Key Features
• Dimmable 24V LED Driver, Max. output power 96W
• UL, ENEC and TUV certification
• 100•277VAC universal input
• 4 channels 24VDC constant voltage output
• Class II power supply, full isolated plastic case
• Rubycon capacitors
• Built-in two-stage active PFC function
• High power factor and efficiency, PF> 0.9, Efficiency> 90%
• Complying with IEC62386·101, 102,207, this DALI driver is compatible with universal DALI masters
• DALI addresses can be manually assigned via buttons and showed on the digital display or automatically assigned by DALI masters
• Fade time, system failure level, power on level configurable
• To control constant voltage single colour, tunable white
Key Features
• Dimmable 24V LED Driver, Max. output power 96W
• UL, ENEC and TUV certification
• 100•277VAC universal input
• 4 channels 24VDC constant voltage output
• Class II power supply, full isolated plastic case
• Rubycon capacitors
• Built-in two-stage active PFC function
• High power factor and efficiency, PF> 0.9, Efficiency> 90%
• Complying with IEC62386·101, 102,207, this DALI driver is compatible with universal DALI masters
• DALI addresses can be manually assigned via buttons and showed on the digital display or automatically assigned by DALI masters
• Fade time, system failure level, power on level configurable
• To control constant voltage single colour, tunable white