SLC SLC LogiQ LED Driver CV 12VDC 2CH 50W White
LogiQ Constant Voltage 12V dimmable 2 channel driver for LED luminaries. Works with multiple control modules: DALI (DT6/DT8), DMX/RDM, RF, 1-10V, ZigBee, Z-Wave (see accessories or plugin modules).
incl. VAT
See document archive
SKU: S37011
Stock:
Technical data | |
---|---|
CE | Yes |
Exterior color | White |
Operating temperature | -20°C ~ +45°C °C |
Protection class | II |
Housing | Plastic housing |
Degree of protection (IP) | IP20 |
Suitable for constant voltage | Yes |
Input | |
---|---|
Electrical connection (Input) | L`N screw connection |
Power factor | 0.95 |
Output | |
---|---|
Output power | 1.0 - 50.0 W |
Output voltage | 12.0 - 12.0 V |
Installation | |
---|---|
Length | 158.7 mm |
Height | 38 mm |
Width | 844 mm |
Model | Dynamic |
logistics data | |
---|---|
Brand | SLC |
General data | |
---|---|
Rated power | 50 W |
• Supplied with terminal cover and cable retainer.
• 50W independent LED driver with full isolated design.
• 100-277VAC wide input, 2 channels 12V constant voltage output.
• The innovative plug-in control module, easy assembly and disassembly.
• Work with multiple modules: DALI (DT6/DT8), DMX/RDM, RF, 1-10V, ZigBee, Z-Wave.
• Standby power consumption <0.5W.
• 1500Hz PWM frequency, smooth and deep dimming to 0.1%, flicker-free, no noise.
• Built-in active PFC function.
• Class Ⅱ protection against electric shock for direct or indirect contact.
• Protections: short circuits, over-temperature, over-voltage.
• To protect load against overheating when working with an external thermistor.
• Suitable for use on normally flammable surfaces.
• 5 years warranty (3% failure rate).
• 50W independent LED driver with full isolated design.
• 100-277VAC wide input, 2 channels 12V constant voltage output.
• The innovative plug-in control module, easy assembly and disassembly.
• Work with multiple modules: DALI (DT6/DT8), DMX/RDM, RF, 1-10V, ZigBee, Z-Wave.
• Standby power consumption <0.5W.
• 1500Hz PWM frequency, smooth and deep dimming to 0.1%, flicker-free, no noise.
• Built-in active PFC function.
• Class Ⅱ protection against electric shock for direct or indirect contact.
• Protections: short circuits, over-temperature, over-voltage.
• To protect load against overheating when working with an external thermistor.
• Suitable for use on normally flammable surfaces.
• 5 years warranty (3% failure rate).