SLC OneSoft 927 Ø68-83 mm Aluminium 570lm Fasedim IP44 36°
SLC OneSoft is a low downlight that can be recessed into holes from 68 to 83mm, which is ideal for replacing halogen downlights. It can be mounted directly into the insulation. SLC OneSoft features a recessed light source, resulting in reduced glare. LED light source with a 36° reflector.
incl. VAT
Back to product variants
See document archive
SKU: SLC1148
Stock:
| Light technic | |
|---|---|
| Beam angle | 36 °, Medium beam 21-40° ° |
| Expected lifetime | 50 000 |
| Light reduction | L80B10 |
| Efficacy | 69 lm/W |
| Luminous flux (lm) | 570 |
| MacAdam (SDCM) | 3 |
| Reflector | High-gloss |
| Colour rendering index CRI | 90-100 |
| Lamp type | LED not exchangeable |
| Light outlet | Direct |
| Light sharing | Symmetric |
| With light source | Yes |
| Colour temperature | 2700.0 - 2700.0 K |
| Rated luminous flux according to IEC 62722-2-1 | 570 lm |
| Colour of light | White |
| Luminous flux | 570.0 - 570.0 lm |
| Colour consistency (McAdam ellipse) | SDCM3 |
| Light distributor | Reflector |
| Technical data | |
|---|---|
| CE | Yes |
| Exterior color | Aluminium |
| Dimmable | Yes |
| IP class | IP44 |
| Operating temperature | -10°C ~ +45°C °C |
| Protection class | II |
| Colour housing | Aluminium |
| Surface protection | Powder coating |
| Suitable for lamp power | 8.0 - 8.0 |
| Type of control gear | LED operating device current-controlled |
| Material housing | Aluminium |
| Material cover | Plastic, transparent |
| Degree of protection (IP) | IP44 |
| Control gear included | Yes |
| Max. system power | 8 W |
| Adjustability | Rotating and swivelling |
| Rated ambient temperature according to IEC62722-2-1 | -10.0 - 40.0 °C |
| Dimming phase cut-off | Yes |
| Power factor | 0.9 |
| Dimming interface | Trailing edge |
| Input | |
|---|---|
| Electrical connection (Input) | L`L`N`N quick connection |
| Voltage type | AC |
| Nominal voltage | 220.0 - 240.0 V |
| Power factor | 0.9 |
| Installation | |
|---|---|
| Height/depth | 46 mm |
| Built-in width | 67 mm |
| Height | 49 mm |
| Built-in height/depth | 46 mm |
| Length | 90 mm, 90 mm |
| Width | 90 mm, 90 mm |
| Can be installed directly into the insulation | Yes |
| Outer diameter | 90 mm |
| Conductor cross section | 0.35 mm2 |
| Connection type | Push-in clamp |
| Suitable for suspended mounting | No |
| Number of poles | 3 |
| Suitable for built-in mounting | Yes |
| Connectable conductor cross section | 0.75 - 2.5 mm² |
| Type of wiring | Suitable for through wiring |
| Suitable for ceiling mounting | Yes |
| logistics data | |
|---|---|
| Imported by | The Light Group |
| Brand | SLC |
| F-Pak | |
|---|---|
| F-pack width | 112 mm |
| F-pack height | 50 mm |
| F-pack weight | 254 g |
| F-pack length | 100 mm |
| D-Pak | |
|---|---|
| D-pack quantity | 50 pcs |
| D-pack width | 290 mm |
| D-pack length | 590 mm |
| D-pack weight | 16200 g |
| D-pack height/diameter | 370 mm |
| General data | |
|---|---|
| Pallet length | 1200 mm |
| Rated power | 22 W |
| M-Pak | |
|---|---|
| M-pack length | 138 mm |
| Number | 1 |
| M-pack weight | 302 g |
| M-pack height | 63.5 mm |
| M-pack width | 112.5 mm |
If you're looking for a high-quality lighting solution with low glare and easy installation, look no further than SLC OneSoft Downlight. This innovative and flexible downlight fits cut-out holes with a 68-83mm diameter and can be directly mounted into the insulation, eliminating the need for a separate ceiling box.
To make the installation process even easier, SLC OneSoft comes fully assembled and packaged in environmentally friendly, plastic-free packaging. Unpack and install – no mess, no fuss.
Not only is SLC OneSoft Downlight practical and easy to install, but it's also perfect for lighting rooms with screens and TVs. Its recessed light source ensures even lighting without glare and comes complete with a dimmable driver for adjusting the light intensity as needed.
With a built-in low height of just 46mm, SLC OneSoft Downlight is ideal for installation in low-height ceilings. And, as it's CE and ROHS certified, you can be confident that it meets high environmental and safety standards. Plus, it's flicker-free, making it an excellent choice for illuminating work areas where eyes are taxed for longer periods.
In short, SLC OneSoft Downlight is the perfect solution for all your lighting needs.
• Dimmable (TED) driver included
• Recommended dimmer: SLC SmartOne (S24019)
• *No installation box required (for Trailing Egde version)
• Suitable for outdoor installation*
• Sea air resistant*
• Quick connection box with Loop-in / Loop-Out
• 16 mm Cable/Tube connection
To make the installation process even easier, SLC OneSoft comes fully assembled and packaged in environmentally friendly, plastic-free packaging. Unpack and install – no mess, no fuss.
Not only is SLC OneSoft Downlight practical and easy to install, but it's also perfect for lighting rooms with screens and TVs. Its recessed light source ensures even lighting without glare and comes complete with a dimmable driver for adjusting the light intensity as needed.
With a built-in low height of just 46mm, SLC OneSoft Downlight is ideal for installation in low-height ceilings. And, as it's CE and ROHS certified, you can be confident that it meets high environmental and safety standards. Plus, it's flicker-free, making it an excellent choice for illuminating work areas where eyes are taxed for longer periods.
In short, SLC OneSoft Downlight is the perfect solution for all your lighting needs.
• Dimmable (TED) driver included
• Recommended dimmer: SLC SmartOne (S24019)
• *No installation box required (for Trailing Egde version)
• Suitable for outdoor installation*
• Sea air resistant*
• Quick connection box with Loop-in / Loop-Out
• 16 mm Cable/Tube connection
