The building is designed to highlight its architectural construction. To achieve this, we have integrated an LED strip that follows the building's lines at the entrance. This creates a stylish effect that attracts extra attention to the building, especially at night.
We have used powerful LED strips mounted on the ceiling to address the lighting needs on the balcony connected to the cafeteria. These not only provide good general lighting for the balcony but also contribute to creating straight light lines that enhance the building's architecture.
All the LED strips used on the facade are controlled with DALI so the customer can program different scenes as needed.
Product selection: HO 10W LED strip // B3 Standard profile
The LED strips installed at the entrance are RGBW, which allows playing with different colours as needed. These strips are controlled with a DALI driver and a user-friendly wall panel, making it easy to change the colour.
Products: RGBW LED strip 10m/ DALI Driver, Wall panel, SLC A3 black aluminium profile.
In the reception area, we have chosen energy-efficient LED panels with a black circular plate. This creates a distinctive look compared to a standard 60x60 panel while providing comfortable general lighting without glare.
Product choice:
Think microprismatic LED panel // Circular plate
Together with the energy-efficient LED panels providing the general lighting, we have added decorative pendant lamps near the glass wall. This creates an intriguing sense of depth as the fixtures are reflected in the glass, while also enhancing the perception of space during the evening hours.
In this area, we have continued to use energy-efficient LED panels with black circular plates in the ceiling to provide comfortable general lighting. These panels are controlled by DALI and programmed with sensors that reduce energy consumption when the cafeteria is not in use.
Product selection: Think Microprismatic LED-panel / Circular plate.
Since the building accommodates many different professions, the various parts of the building have different lighting needs that must be tailored to the work being performed.
This building has several types of businesses, such as electrical installers, painters, sheet metal workers, carpenters, and plumbers.
Here we have used the Vector HiBay as general lighting. This is a highly energy-efficient (182 lm/W) and easy-to-install luminaire with wide light distribution, which means it illuminates well into shelves and racks. This helps to ensure that we meet lighting requirements with low power consumption.
PS! Due to the efficiency and light distribution, we managed to light up the 520 m2 room with a ceiling height of 8 meters using only six fixtures.
Inside the workshop, the client wanted plenty of light, so we chose an open industrial fixture that provides ample illumination with low glare. This ensures a bright, comfortable work environment while minimizing eye strain for those working in the space.
The cutting room required a closed industrial luminaire due to the activities planned in the room, with a need for good lighting to perform precision work. Therefore, we chose the SLC Beam 1500, which provides good lighting, low glare, and good light distribution.
In this area, there was a need for strong working light throughout the entire space. Therefore, we chose to install Vector HiBay fixtures at the high ceiling and Factor fixtures under the mezzanine.
This ensures ample and even working light while maintaining low energy consumption.
Executing installer: EK-Elektro
Contact us for a no-obligation discussion about your project.
