SLC Mini One Tilt Ø44 mm Black 165lm 2700K Ra>90 Without driver IP44 100°
SLC MiniOne Tilt is a stylish and tiltable mini-downlight with high lumen output and a wide beam angle designed for decorative lighting. Get the final touch on your project with SLC MiniOne. Connect up to 6 downlights on one driver. The MiniOne Tilt can be tilted 40°. For built-in mounting. IP44 (Front) / IP21 (Back).
incl. VAT
Back to product variants
See document archive
SKU: SLC1201
Stock:
Light technic | |
---|---|
Beam angle | 100 °, Extreme wide beam >80° ° |
Expected lifetime | 50 000 |
Light reduction | L90B10 |
Efficacy | 55 lm/W |
Luminous flux (lm) | 165 |
MacAdam (SDCM) | 3 |
Colour rendering index CRI | 90-100 |
Lamp type | LED not exchangeable |
Light outlet | Direct |
Light sharing | Symmetric |
With light source | Yes |
Colour temperature | 2700.0 - 2700.0 K |
Rated luminous flux according to IEC 62722-2-1 | 165 lm |
Colour of light | White |
Light distributor | None |
Technical data | |
---|---|
CE | Yes |
Exterior color | Black |
Dimmable | Yes |
IP class | IP44 |
Protection class | III |
Colour housing | Black |
Surface protection | Powder coating |
Type of control gear | LED operating device current-controlled |
Material housing | Aluminium |
Material cover | Other |
Degree of protection (IP) | IP44 |
Max. system power | 3 W |
Adjustability | Swivelling |
Dimming phase cut-off | Yes |
Dimming interface | Without driver |
Input | |
---|---|
Voltage type | DC |
Nominal voltage | 3.0 - 18.0 V |
Installation | |
---|---|
Height/depth | 31 mm |
Height | 31 mm |
Built-in height/depth | 29 mm |
Width | 50 mm |
Outer diameter | 50 mm |
Connection type | Push-in clamp |
Number of poles | 2 |
Suitable for built-in mounting | Yes |
Type of wiring | Suitable for through wiring |
Suitable for ceiling mounting | Yes |
logistics data | |
---|---|
Brand | SLC |
F-Pak | |
---|---|
F-pack width | 80 mm |
F-pack height | 57 mm |
F-pack length | 60 mm |
General data | |
---|---|
Rated power | 3 W |
SLC MiniOne Tilt is a stylish and tiltable mini-downlight with high lumen output and a wide beam angle designed for decorative lighting. Get the final touch on your project with SLC MiniOne. Connect up to 6 downlights on one driver. The MiniOne Tilt can be tilted 40°. For built-in mounting. IP44 (Front) / IP21 (Back).
• Diameter: 50 mm / Cut out hole: 44 mm / Built-in height: 31 mm
• Recommended dimmer: SLC SmartOne (S24019)
• Works with DALI using SLC DALI/AC-Push to Trailing Edge Controller (S23023)
• Diameter: 50 mm / Cut out hole: 44 mm / Built-in height: 31 mm
• Recommended dimmer: SLC SmartOne (S24019)
• Works with DALI using SLC DALI/AC-Push to Trailing Edge Controller (S23023)