To top

SLC Controller 4x5A 12-36V DALI DT8 IP20 RGBW/TW

The controller can be used to control all DT8 color types (XY, Tc, RGBWA, XY+Tc and RGB+Tc). 4 output channels. Can be programmed directly on the OLED screen. Can be used as a DALI master. Cost- and time-saving controller. Possibility to pre-define and memorize 16 scenes.

incl. VAT


See document archive
SKU: S23026
Stock:
Light technic
Expected lifetime 50 000
Technical data
Number of DALI-address 4
DALI-bus power consumption 2 mA
CE Yes
IP class IP20
Operating temperature -20°C ~ +45°C °C
Protection class II
Housing Plastic housing
Programmable Yes
Degree of protection (IP) IP20
Number of colour channels 4
Operating method DALI
Dimming interface DALI DT8
Input
Electrical connection (Input) L`N quick connection
Input voltage 12.0 - 36.0 V
Output
Max. output current 20 A
Output voltage 12.0 - 36.0 V
Installation
Height 28 mm, 28 mm
Length 170 mm, 170 mm
Width 53.4 mm, 53.5 mm
Model Dynamic
Surface-mounted Yes
Suitable for outdoor use No
logistics data
Imported by The Light Group
Brand SLC
D-Pak
D-pack length 380 mm
D-pack weight 12900 g
D-pack height/diameter 280 mm
D-pack quantity 70 pcs
D-pack width 270 mm
F-Pak
F-pack width 53.4 mm
F-pack height 28 mm
F-pack weight 160 g
F-pack length 170 mm
M-Pak
M-pack weight 170 g
M-pack height 55 mm
M-pack width 33 mm
M-pack length 173 mm
Number 1
• DALI DT8 dimmer, 4 channels PWM output, built-in DALI master function
• OLED display interface, easy & fast installation
• No DALI master required for configuration
• Cost & time saving than DALI USB configuration
• DT8 colour types all in one: XY, Tc, RGBWA, XY+Tc and RGB+Tc settable
• Each device is controlled via a single DALI address
• Enable to address and group the DT8 device
• Enable to predefine & recall 16 scenes for the DT8 device
• 250Hz/500Hz/1500Hz PWM frequency settable, smooth and fine DT8 colour control
• Enables to set a min. level for dimming between this level to the max. level
• Enable to set output level and manual control (stand-alone)
• Enables to set fade time, fade rate, power on level, system failure level
• Compatible with universal DALI masters that support DT8 commands.
• Complies to IEC 62386-209: 2011