To top

SLC LED STRIP BLUE CV 120 5m 10mm 9,6W 180lm IP20

Single colour LED- strip, 9,6W/m. Suitable for visual decorative and accentual effects.

incl. VAT

Back to product variants

See document archive
SKU: S11101
Stock:
Light technic
Expected lifetime 50 000
Number of LED`s per meter 120
Light reduction L80B10
Beam angle 120
Lamp type LED not exchangeable
Lamp power per meter 9.6 W/m
Number of nodes per meter 120 LED`s
Colour of light Blue
Luminous flux per meter 180 lm/m
Rated life time L70/B50 at 25 °C 50000 Hours
Lamp power per foot 2.88 W
Luminaire efficacy 18.8 lm/W
Number of nodes per foot 36
Technical data
Cutting point, every 50 mm
Dimmable Yes, with PWM or AM
IP class IP20
LED-Strip length 5 m
Max length per connection: 5 meter m
Rated power per meter 9.6 W/m
Protection class III
Type of control gear LED operating device voltage-controlled
Suitable for dimmer Yes
Degree of protection (IP) IP20
Lamp voltage 24.0 - 24.0 V
Max. system power 48 W
Technology Constant voltage (CV)
Input
Electrical connection (Input) 2 meter wire in each end
Voltage type DC
Installation
Length of particular segments 50 mm
Height/depth 2 mm
Length 5000 mm
Width 10 mm
Mounting method Surface mounting/recessed mounting
Model Strip
Conductor cross section 0.35 mm2
Connection type Solder
Self-adhesive Yes
Number of poles 2
With protective cover No
With connection set No
With end piece No
Type of wiring Ending
logistics data
Imported by The Light Group
Brand SLC
D-Pak
D-pack length 550 mm
D-pack weight 17600 g
D-pack height/diameter 450 mm
D-pack quantity 100 pcs
D-pack width 290 mm
F-Pak
F-pack width 190 mm
F-pack height 12 mm
F-pack weight 170 g
F-pack length 205 mm
M-Pak
M-pack weight 4400 g
M-pack height 250 mm
M-pack width 220 mm
M-pack length 260 mm
Number 25
General data
Rated power 48 W
• Low wattage strip, 9,6W/m
• Suitable for visual decorative and accentual effects
• Good solution as background light on walls, inside of shelves, and niches
• 3Ms adhesive tape on the backside of the strips ensures easy and quick installation
• Available in many lengths, colour temperatures, and IP-rating options

SLC LogiQ LED Driver CV 12VDC 50W 2CH

LogiQ Constant Voltage 12V dimmable 2 channel driver for LED luminaries. Works with multiple control modules: DALI (DT6/DT8), DMX/RDM, RF, 1-10V, ZigBee, Z-Wave (see accessories or plugin modules).
S37011
 

SLC Power Supply 60W 24V CV EDXe IP20

- compact LED driver- Constant Voltage (CV)- Electronic short-circuit protection: reversible- protection against "idle"- SELV (Safety Extra Low Voltage)- IP 20
S32072
 

SLC Power Supply CV 24V 50W AM Trailing Edge

50W power supply with built-in AM dimmer. Dimmed with phase-cut / section. Mono.
S32080
 

SLC Power Supply CV 24V 50W DALI DT6 1CH

DALI DT6 50W dimmable constant voltage LED driver with 1 channel 24VDC output.
S32007
 

SLC Power Supply CV 24V 50W PWM 1-10V

50W power supply with 1-10V current-controlled PWM-dimming. Compatible with all types of 1-10V signal and controllers. Can also be controlled with PushDim
S32041
 

SLC SmartOne Power Supply CV 24V 50W Mono Zigbee

Mono 24V, PSU with built-in PWM dimmerBased on the latest Zigbee 3.0 protocolWorks stand-alone when connecting a push switch or wirelessly via TouchLink to a remote control/switchSupports TouchLink communication with Zigbee remotes and switchesCompatible with most smart home systems
S32053
 

SLC SmartOne Zigbee Controller CV 5x4A 12-24V Mono/TW/RGB/RGBW

• 24V Controller 5x4A with PWM dimmer• Based on the latest Zigbee 3.0 protocol• Supports TouchLink communication with Zigbee remotes and switchesBuilt-in dip switch to change between Mono, Tunable White, RGB, RGBW and RGB + TW• Compatible with most smart home systems
S24018