To top

SLC One360 Downlight R68-83

SLC One360° is a low-build-downlight that can be recessed into holes from 68 to 83mm, perfect for replacing older halogen downlights. It can be installed directly in the insulation. Tilts 30° in all directions (360°). LED light source with a 36° reflector. Dimmable with Trailing Edge Dimmers.

See variants
dr_SLC
One 360° is ”a jack of all trades” downlight for all types of installations.
If you could only choose One downlight, the One360° would be your best choice.
You can’t go wrong with a semi-recessed high end LED chip together with tilt/
rotate, iso safe design, flexible cut-out hole and low installation depth.
The One 360° thrives just as good in a cornice in the Norwegian winter mountains
as in a warm and cosy living room.
• Dimmable (TED) driver included
• Recommended dimmer: SLC SmartOne (S24019)
• *No installation box required (TED)
• Tiltable 30° in all directions (360°)
• Suitable for outdoor installation*
• Quick connection box with Loop-in / Loop-Out
• 16 mm Cable/Tube connection

SLC One360 / OneSoft Rehab Ring BL Ø83-110 Ø134

Extension ring that fits cut-out holes Ø: 83-110 mm• Inner diameter Ø: 70 mm• Outer diameter Ø: 134 mm• Produced in the same finish as the white OneSoft & One360
SLC1151
 

SLC SmartOne Zigbee Mini 250W White Trailing edge IP20

Mini phase section dimmer based on the latest Zigbee 3.0 protocol. Dimmer from 1-100%. Push input. Compatible with most smart home systems. Supports TouchLink communication with Zigbee remote controls and switches. Small size, fits in standard wall box. Adjustable minimum dimming level.
S24013
 

SLC SmartOne Zigbee Relay On/Off 250W White Not dimmable IP20

On/off switch based on the latest Zigbee 3.0 protocol. 100-240V AC input and output voltage. Push input. Compatible with most smart home systems. Supports TouchLink communication with Zigbee remote controls and switches. Small size, fits in standard wall box. ATTENTION! Not potential-free output.
S24015