SLC MiniOne Tilt Ø44 mm Black 165lm 3000K Ra>90 Without driver IP44 100°
SLC MiniOne Tilt is a stylish and tiltable mini-downlight with high lumen output and a wide beam angle designed for decorative lighting. Get the final touch on your project with SLC MiniOne. Connect up to 6 downlights on one driver. The MiniOne Tilt can be tilted 40°. For built-in mounting. IP44 (Front) / IP21 (Back).
incl. VAT
Back to product variants
See document archive
SKU: SLC1203
Stock:
| Light technic | |
|---|---|
| Beam angle | 100 °, Extreme wide beam >80° ° |
| Expected lifetime | 50 000 |
| Light reduction | L90B10 |
| Efficacy | 55 lm/W |
| Luminous flux (lm) | 165 |
| MacAdam (SDCM) | 3 |
| Colour rendering index CRI | 90-100 |
| Lamp type | LED not exchangeable |
| Light outlet | Direct |
| Light sharing | Symmetric |
| With light source | Yes |
| Colour temperature | 3000.0 - 3000.0 K |
| Rated luminous flux according to IEC 62722-2-1 | 165 lm |
| Colour of light | White |
| Light distributor | None |
| Technical data | |
|---|---|
| CE | Yes |
| Exterior color | Black |
| Dimmable | Yes |
| IP class | IP44 |
| Protection class | III |
| Colour housing | Black |
| Surface protection | Powder coating |
| Type of control gear | LED operating device current-controlled |
| Material housing | Aluminium |
| Material cover | Other |
| Degree of protection (IP) | IP44 |
| Max. system power | 3 W |
| Adjustability | Swivelling |
| Dimming phase cut-off | Yes |
| Dimming interface | Without driver |
| Input | |
|---|---|
| Voltage type | DC |
| Nominal voltage | 3.0 - 18.0 V |
| Installation | |
|---|---|
| Height/depth | 31 mm |
| Height | 31 mm |
| Built-in height/depth | 29 mm |
| Width | 50 mm |
| Outer diameter | 50 mm |
| Connection type | Push-in clamp |
| Number of poles | 2 |
| Suitable for built-in mounting | Yes |
| Type of wiring | Suitable for through wiring |
| Suitable for ceiling mounting | Yes |
| logistics data | |
|---|---|
| Brand | SLC |
| F-Pak | |
|---|---|
| F-pack width | 80 mm |
| F-pack height | 57 mm |
| F-pack length | 60 mm |
SLC MiniOne Tilt is a stylish and tiltable mini-downlight with high lumen output and a wide beam angle designed for decorative lighting. Get the final touch on your project with SLC MiniOne. Connect up to 6 downlights on one driver. The MiniOne Tilt can be tilted 40°. For built-in mounting. IP44 (Front) / IP21 (Back).
• Diameter: 50 mm / Cut out hole: 44 mm / Built-in height: 31 mm
• Recommended dimmer: SLC SmartOne (S24019)
• Works with DALI using SLC DALI/AC-Push to Trailing Edge Controller (S23023)
• Diameter: 50 mm / Cut out hole: 44 mm / Built-in height: 31 mm
• Recommended dimmer: SLC SmartOne (S24019)
• Works with DALI using SLC DALI/AC-Push to Trailing Edge Controller (S23023)
