SLC One360 Ø68-83 mm Black 495lm 1800-3000K Ra>90 Trailing edge IP44 36°
One 360° is ”a jack of all trades” downlight for all types of installations. If you could only choose One downlight, the One360° would be your best choice. You can’t go wrong with a semi-recessed high end LED chip together with tilt/ rotate, iso safe design, flexible cut-out hole and low installation depth.The One 360° thrives just as good in a cornice in the Norwegian mountains as in a warm and cosy living room.
incl. VAT
Back to product variants
See document archive
SKU: SLC1142
Stock:
| Light technic | |
|---|---|
| Beam angle | 36 °, Medium beam 21-40° ° |
| Expected lifetime | 50 000 |
| Light reduction | L80B10 |
| Efficacy | 56 lm/W |
| Luminous flux (lm) | 495 |
| MacAdam (SDCM) | 3 |
| Reflector | High-gloss |
| Colour rendering index CRI | 90-100 |
| Lamp type | LED not exchangeable |
| Light outlet | Direct |
| Light sharing | Symmetric |
| With light source | Yes |
| Colour temperature | 1800.0 - 3000.0 K |
| Rated luminous flux according to IEC 62722-2-1 | 495 lm |
| Colour of light | White |
| Luminous flux | 495.0 - 495.0 lm |
| Colour consistency (McAdam ellipse) | SDCM3 |
| Light distributor | Reflector |
| Luminaire efficacy | 75 lm/W |
| Technical data | |
|---|---|
| CE | Yes |
| Exterior color | Black |
| Dimmable | Yes |
| IP class | IP44 |
| Operating temperature | -10°C ~ +45°C °C |
| Protection class | II |
| Colour housing | Black |
| Surface protection | Powder coating |
| Type of control gear | LED operating device current-controlled |
| Material housing | Aluminium |
| Material cover | Plastic, transparent |
| Degree of protection (IP) | IP44 |
| Control gear included | Yes |
| Max. system power | 8 W |
| Adjustability | Rotating and swivelling |
| Rated ambient temperature according to IEC62722-2-1 | -10.0 - 45.0 °C |
| Dimming phase cut-off | Yes |
| Power factor | 0.9 |
| Dimming interface | Trailing edge |
| Input | |
|---|---|
| Electrical connection (Input) | L`L`N`N quick connection |
| Voltage type | AC |
| Nominal voltage | 220.0 - 240.0 V |
| Power factor | 0.9 |
| Installation | |
|---|---|
| Height/depth | 46 mm |
| Built-in width | 67 mm |
| Height | 49 mm |
| Built-in height/depth | 46 mm |
| Length | 90 mm, 90 mm |
| Width | 90 mm, 90 mm |
| Can be installed directly into the insulation | Yes |
| Outer diameter | 90 mm |
| Conductor cross section | 0.35 mm2 |
| Connection type | Push-in clamp |
| Suitable for suspended mounting | No |
| Number of poles | 3 |
| Suitable for built-in mounting | Yes |
| Connectable conductor cross section | 0.75 - 2.5 mm² |
| Type of wiring | Suitable for through wiring |
| Suitable for ceiling mounting | Yes |
| logistics data | |
|---|---|
| Imported by | The Light Group |
| Brand | SLC |
| F-Pak | |
|---|---|
| F-pack width | 113 mm |
| F-pack height | 50 mm |
| F-pack weight | 320 g |
| F-pack length | 100 mm |
| D-Pak | |
|---|---|
| D-pack quantity | 50 pcs |
| D-pack width | 290 mm |
| D-pack length | 590 mm |
| D-pack weight | 19500 g |
| D-pack height/diameter | 370 mm |
| General data | |
|---|---|
| Pallet length | 1200 mm |
| Rated power | 10 W |
| M-Pak | |
|---|---|
| M-pack length | 138 mm |
| Number | 1 |
| M-pack weight | 368 g |
| M-pack height | 63.5 mm |
| M-pack width | 112.5 mm |
Quick and easy installation
We have always been thinking about electrician when developing our products. Focusing on solutions which is practical and easy for the installer. One 360º and OneSoft comes with a quick connector between the downlight and driver so you can easily detach the downlight from the driver. We also use quick connection boxes with strain relief and connection for tubes.
One downlight for indoor and outdoor use
We have created a downlight which is suitable for outdoor and indoor use. The downlight is not 100% water sealed but it is resistant enough to be used outdoors (IP44).
Perfect for rehab projects
We created a downlight for all existing cut-out holes from 68-83 mm. This combined with a low installation height of just 46 mm, makes this downlight perfect for replacing old halogen downlights. You can also install these downlights directly into the insulation.
• SLC One360° for new and rehab projects
• Can be mounted into insulation, up to the moisture barrier
• No installation box required
• Tilts 30° in all directions (360°)
• Suitable for outside installation
• Quick Connection
• 16 mm Cable/Tube connection
We have always been thinking about electrician when developing our products. Focusing on solutions which is practical and easy for the installer. One 360º and OneSoft comes with a quick connector between the downlight and driver so you can easily detach the downlight from the driver. We also use quick connection boxes with strain relief and connection for tubes.
One downlight for indoor and outdoor use
We have created a downlight which is suitable for outdoor and indoor use. The downlight is not 100% water sealed but it is resistant enough to be used outdoors (IP44).
Perfect for rehab projects
We created a downlight for all existing cut-out holes from 68-83 mm. This combined with a low installation height of just 46 mm, makes this downlight perfect for replacing old halogen downlights. You can also install these downlights directly into the insulation.
• SLC One360° for new and rehab projects
• Can be mounted into insulation, up to the moisture barrier
• No installation box required
• Tilts 30° in all directions (360°)
• Suitable for outside installation
• Quick Connection
• 16 mm Cable/Tube connection
